Part 4: Back Up and Restore Running Configurations Using Router Flash Memory Part 3 Use TFTP to Back Up and Restore the Router Running Configuration Part 2: Use TFTP to Back Up and Restore the Switch Running Configuration Note: In the event that TFTP command is not recognized by the computer, you may have to enable first TFTP on Windows Optional Features.Part 1: Build the Network and Configure Basic Device Settings Note: Please remember to change your PC back to “Obtain an IP address automatically” and “Obtain DNS server address automatically”.
The rest of LED’s on the router will also turn ON indicating that the router has booted up properly. When the upload is successful, the Power LED will turn solid. Wait for a few minutes (be patient, do not reboot the router). Press Enter to execute the TFTP command.Count at least 10 flashing power LED and release the reset button.It starts with an orange color, and then start flashing. Power ON the router while holding down the reset button.Hold down the reset button on the back of router with a paper clip.Unplug all port connections from router except the PC you are using to upload.Change the command prompt directory to your desktop.Open Command Prompt by typing “cmd” in the Windows search box.Select Use the following IP address and set the IP address information like below:.Double-click Internet Protocol Version 4 (TCP/IPv4).Right-click Ethernet and select Properties.Right-click the Windows start button then select Network Connections.Connect a PC wired to the router and set it to have a static IP address (example 192.168.1.10).įor Mac users, go to Beginner: How To Set Up A Static IP in Mac OS X and proceed to step 5.
Make sure to extract the file from the zip folder.
0 kommentar(er)
